How to enter RANGE ROVER P38 EKA CODE« Back to Questions List

How to enter RANGE ROVER P38 EKA CODE
Posted by Les
Asked on February 18, 2023 6:35 pm
0
Using the ignition key insert it into the drivers door lock. Turn the key anticlockwise to the locking position and back to the central position 4 times. The first digit – Turn the key fully, as far as it can go, clockwise to the unlock position (only the drivers door will unlock) then back to the central upright position. This should be done the amount of times as the first digit on your security card. The second digit – Turn the key fully, as far as it can go, anticlockwise to the lock position then back to the central, upright position. This should be done the amount of times as the second digit on your security card. The third digit – Turn the key clockwise to the unlock position again, the number of times shown on the security card The fourth digit – Turn the key anticlockwise to the lock position again, the number of times shown on the security card. Once this has been completed turn the key to the unlock position once. If the code has been entered correctly, open the door and the red flashing LED light on the dashboard will stop. You will now be able to start the vehicle.
Posted by Les
Answered On February 18, 2023 6:36 pm